RTP REINFORCED PIPE EXTRUSION LINE

RTP REINFORCED PIPE EXTRUSION LINE

Reinforced Thermoplastic Pipe (RTP) Pipe Extrusion Line”, which introduces advanced manufacturing technology and techniques from home and abroad and provides more optimized solutions for continuous and stable production and intelligent operation of equipment.

Reinforced Thermoplastic Pipe (RTP) Extrusion Line Features

1. Base pipe production

2. Base pipe winding

3. Product Coating

4. Finished pipe cooling and haul-off

5. The production line adopts a professional plastic machinery control system with humanized design; Siemens series PCL, equipped with HMI display, convenient operation, and precise control.

Nominal Diameter(mm)-Nominal pressure(Mpa)-Delivery Method-Pipe length

50-3.5-Coil delivery

or straight pipe delivery upon request-Customized according to customer requirements

63-3.5--

75-3.5--

90-3.5--

110-1.6/2.5/3.5--

160-1.6/2.5/3.5-Direct Pipe Delivery-Generally 6m, 9m and12m

200-1.6/2.5/3.5--

250-1.0/1.6/2.0/2.5--

315-1.0/1.6/2.0/2.5--

400-1.0/1.6/2.0/2.5--

500-1.0/1.6/2.0/2.5--

630-0.8/1.0/1.6/2.0--

Winding and installation

RTP pipes of various reinforcement materials

Reinforced thermoplastic pipe (RTP) is divided into three main layers: a polymer liner, a reinforcement layer, and an outer sheath layer. The reinforcement layer is made of aramid fiber, polyester fiber, etc. The inner and outer layers and the middle layer are independent of each other.

There are several kinds of RTP pipe based on different kinds of reinforced material

Polyester tape-reinforced RTP pipe

Aramid (nylon) fiber tape-reinforced RTP

Glass fiber tape reinforced RTP pipe

Steel wire rope covered with plastic tape-reinforced RTP pipe